In a perfect world, the water that runs through your home’s faucets would be safe enough to use for everything from drinking to cooking to bathing. These days, many people rely on their countertop water filter, tap water filter, water softener, and even whole-house water filter.
There are more issues than ever with municipally treated water, hard water, and water quality concerns. A murky water supply can cause concern. A professional plumber Sydney suggests this common reason. Here are five typical causes of murky tap water and some suggestions for fixing the problem.
There’s Air In Your Pipes:
Aeration is the leading reason for water haziness. The presence of air within the pipes usually indicates high water pressure. At higher pressures, the air becomes more dissolvable. This causes the formation of air bubbles.
Cloudiness in the water from the faucet is a result of these bubbles. A few seconds is all it takes for gray water retrieved from the sink to become clear again. Cloudy water is safe to drink, cook with, and shower in due to increased air pressure, but it could be a sign of other issues.
Unfortunately, this causes significant water waste and, thus, exorbitant water prices. Damage to your appliances is possible due to the high water pressure. The likelihood of early failure for both your dishwasher and washing machine increases. Therefore, you may need to replace them much sooner than you had initially planned.
In addition, using these appliances under high water pressure might reduce the efficacy of cleaning and spot removal solutions. You might have emergency plumbing services install a pressure reduction valve to ease the pressure.
The weather outside is cold.
Water cloudiness might be caused by the intense cold you’ve been experiencing. Low temperatures are unlikely to be the cause in late spring and summer, but this might be your problem in late autumn and winter. There is a greater capacity for air storage in cold water than in warm water.
This is because subzero temperatures increase the air’s solvability. If low temperatures are to blame, you can always expect the water to clear up as they are elevated. But if you turn on the faucet and the hot water is cloudy, it’s not the pipes.
Hard Water:
Following the presence of air bubbles or aerated water as the primary source of cloudiness, hard water is the next most common culprit. The accumulation of minerals like magnesium and calcium causes hard water.
It lacks the crisp cleanliness that consumers have come to expect and may leave a light grey film on surfaces like sinks, tubs, and shower stalls. After a shower or bath in hard water, the skin may become dry, damaged, and irritated. Long-term exposure may also create health and aesthetic difficulties, such as hair loss and dryness.
Hard water is likely to blame if your water is murky and doesn’t clear up after sitting for a long. Using a water softener may improve the quality of your water in many ways, including how it tastes, the cleanliness of your plumbing, and the health of your skin and hair.
Your Tap Water Has Methane Gas:
Methane gas isn’t often seen in municipal water systems serving homes. On the other hand, it might be a problem for sure Wisconsin homeowners. Methane gas is typically found in water sources near fracking plants and may be introduced via polluted groundwater and other activities.
Methane is incredibly flammable, yet it evaporates fast when it reaches the air above the sea. If the water from your faucets clears up rapidly and is not due to aeration or high air pressure, methane pollution may be at fault.
Sediment Deposits Can Make Hot Water Appear Cloudy:
Instead of being created by methane gas, cloudy water is more likely to result from silt or calcium carbonate. Dirty water from the bottom of water heaters is not fit for human consumption since it contains harmful levels of minerals and sediment. The water will always seem foggy due to this problem, unlike when methane gas or aerated pipes are to blame. When left in a glass or other container for an extended period, tap water retains an unattractive, opaque appearance.
Sediment accumulation in a water heater may be avoided with a regular cleansing routine. This is something you can do in your own time with no problem. An accumulation of sediment in a water heater may lower its efficiency and shorten its life if not removed. This sediment ultimately leads to the water heater’s inside deteriorating and creating the optimal conditions for rust to form.
Conclusion:
If cloudy water is caused by sediment or hard water, a water softener can help. Softeners make water taste better but don’t clean or filter it. When TSS levels are excessive or unsatisfied with municipally treated water, you’ll need a water filter.
